Home » Products » Oil Test Set

Oil Test Set

» Send Inquiry

Automatic Oil Test Set Range 0-100KV / 0-80 KV / 0-60 KV

The voltage shall start rising after the preset time. After flash, the stirrer motor will start & go off as per the preset time. This process shall repeat 6 times thereafter switched off automatically and digital kV voltmeter shall indicate average voltage. The equipment shall be complete with test cup with electrode & Go No Go gauge.

STEP UP TRANSFORMER: A double wound secondary Epoxy molded Air cooled / oil cooled transformer is used to boost the voltage to required voltage.

VOLTAGE CONTROL: A step less auto-transformer (Variac) is used for controlling the output from zero to maximum.

INPUT VOLTAGE: 220/230 V single phase

OUTPUT VOLTAGE: 0-60 KV, 0-80 KV, & 0-100 KV

CAPACITY: 0.5 KVA to 1 KVA

METERING: Voltmeter is provided on LT side, calibrated to indicate the secondary output voltage.

ELECTRODE: Suitable size of electrode with adjustable gap is provided

PROTECTION: The unit consists of fast acting DC relay provided on HT side to cut   off the HT supply in case of flash, Zero start interlocking is provided

TEST CUP: A test cup of suitable size made of transparent thermoplastic

Control

• Potentiometer for output Voltage Setting.
• Switch for manual and auto use.
• Push button to increase or decrease voltage manually in case of   manual position.

Protection

The design of the unit is such that it can withstand 20 percent overloading for short durations without any damage. Each unit consists of minimum-maximum range indicator, motor movement control Micro switch at the end of the range and oil Inlet & Outlet valve, oil level indicator, lifting arrangement for whole unit and transformer only, cooling radiator as per the capacity requirement.